Welcome to Nefkom Aluminium! The home of Quality roofing Sheets.

logo
Awesome Image

Introduction

A roof is more than just a cover over your head — it’s your building’s first line of defense against the elements. Whether you’re building a new home, office or renovating an existing structure, proper roof installation is critical to ensure safety, comfort, and long-term durability.

Unfortunately, many homeowners, contractors, and even developers make costly roofing mistakes during construction. These errors often result in leaks, unnecessary repairs, material waste, and even complete roof failures.

Nefkom Aluminium Company Limited has seen it all. With years of experience in roofing sheet manufacturing, installation and supply across Nigeria, we’ve helped countless clients fix avoidable issues. In this post, we’ll walk you through the top 7 roof installation mistakes to avoid — and how you can get it right from the start.

1. Using Low-Quality Roofing Materials

The Mistake:
In a bid to reduce building costs, some people opt for cheap or substandard roofing sheets and tiles. These low-grade materials often rust quickly, fade under the sun, or develop cracks within a short period — leading to frequent repairs or even total replacement.

The Solution:
Invest in high-quality roofing sheets from trusted manufacturers like Nefkom. We produce durable Aluminium Roofing Sheets, Stone Coated Roof Tiles, and Windows that withstand Nigeria’s climate and offer long-term peace of mind. Remember: cheap materials today could mean expensive problems tomorrow.

2. Incorrect Roof Slope (Pitch)

The Mistake:
Different roofing materials require specific slopes to function effectively. Installing Longspan or Metcopo sheets on a roof with too shallow a pitch can cause rainwater to accumulate and leak into the building.

The Solution:
Always consult with roofing experts. At Nefkom, we advise our clients on the correct roof pitch based on their design and location to ensure smooth water flow and prevent future leaks.

 3. Poor Installation by Unskilled Workers

The Mistake:
No matter how good the material is, if it’s not installed correctly, problems are inevitable. Issues like misaligned sheets, loose fittings, and poor ridge finishing are often caused by untrained installers.

The Solution:
Use certified roofing installers who follow proper procedures. Nefkom has a network of trained professionals who deliver clean, reliable, and secure installations — every time.

 4. Improper or No Roof Underlay

The Mistake:
Skipping the underlay (roof lining or membrane) may save money during construction, but it exposes your building to moisture buildup, leaks, and structural damage.

The Solution:
Incorporate quality underlay systems, especially for residential buildings or when using stone coated tiles. It adds a layer of protection against water ingress and prolongs the roof’s lifespan.

 5. Wrong Fasteners or Screws

The Mistake:
Many roofs fail because of incorrect screws — either the wrong type or poor placement. This leads to loosened sheets, vibration noise, or water penetration during heavy rain.

The Solution:
Use galvanized or aluminium fasteners and install them in the correct position and spacing. At Nefkom, we offer guidance on fastener selection and even supply the accessories to ensure a secure fit.

 6. Lack of Proper Roof Ventilation

The Mistake:
Without proper ventilation, hot air gets trapped under the roof, making your space uncomfortable and potentially damaging the roofing material over time.

The Solution:
Design your roof with adequate ventilation. We help builders integrate ridge vents, soffit vents, and other solutions that regulate temperature and moisture inside the roof structure.

 7. Wrong Roof Measurements

The Mistake:
Incorrect measurements result in buying too little or too much roofing material — leading to project delays, waste, or unexpected costs.

The Solution:
Get professional roof measurement services before purchasing materials. Nefkom offers accurate estimation and consultation to help you plan efficiently and save money.

Final Thoughts

Roofing is one of the most important investments in any construction project. Avoiding these common mistakes can save you money, time, and unnecessary stress — while ensuring your roof is durable, beautiful, and problem-free for many years.

When in doubt, let experts handle it.

Need Help with Roofing in Nigeria?

At Nefkom Aluminium Company Limited, we don’t just manufacture and supply premium-quality roofing materials — we guide you every step of the way. From choosing the right roof design to accurate measurement, fast delivery, and professional installation, we’ve got you covered.

👉 Request a Free Quote or Consultation Now
📞 Or call us today on 081-011-24750 for immediate support.

About Author

nefkomaluminium.com

Leave A Comment